The third generation of the new GF, GM series clutch type high-energy screw press has a significant improvement compared with the previous two generations of products,
There are nine main advantages:
1、The power of the motor is 50% lower than that of the ordinary electric pressure machine.
2、Striking speed is 2 times faster than ordinary electric press.
3、Strike energy strength, and high energy stiffiiess machine is the same, not subject to travel restrictions can be set in any position of the output energy strength.
4、The clutch does not use hydraulic cylinder, reduces the maintenance capacity, can be compared with hot forging, energy saving.
5、Simple structure, low failure rate, easy to use, can be compared with hot forging.
6、The service life of the mold can be increased by 2 times.
7、Energy saving and consumption reduction, rough edge can be saved by 50%.
8、Intelligent electrical integration, with remote control function, easy to use, a good program adjustment, no longer with professional engineers to adjust the program.
9、Safety, environmental protection and energy saving, in line with the construction of energy-saving society advocated by the state.
From the design concept, this new press is divided into GF, GM two series
GF series clutch type high-energy electric screw press is a small press of 100-1000 tons. It adopts the structure of the whole body, which increases the rigidity of the body and improves the precision of forging workpiece. Can be used as a forging equipment, can also be used to make a punch for trimming, correction and other processes, fast working speed, can be with the bottom dead point. Simple structure without failure rate, extremely energy saving.

GM series clutch type high-energy electric screw press is a large forging equipment, from 1600 tons to 40000 tons, the power and energy comes from the top clutch, the motor power is small, the striking energy is big, the energy saving is efficient, is suitable for precision forging, is a new type of advanced forging equipment with large tonnage in China.

GF series high energy screw press

Model	Unir	GF-300	GF-400	GF-630	GF-1000
Capacity	Kn	3000	4000	6300	10000
Energy	Kj	40	60	100	220
No.of Stroke	per min	30-40	35-40	30-35	25-40
Max Ram Stroke	mm	350	380	400	450
Ram Speed	≥mm/s	500	500	500	500
Min.Shut Heighr	mm	400	540	560	650
Bolster Dimension	mm	650*570	800*690	900*750	1000*900
Main Motor Power	kw	18.5	22	30	45